Network User's Guide

Web Based Management
69
5
d Click Scan to FTP/Network Profile on the Scan page.
Now you can configure and change the following Scan to FTP settings using a web browser:
 Profile Name (Up to 15 characters)
 Host Address (FTP server address)
 Username
 Password
 Store Directory
 File Name
 Quality
 File Type
 Glass Scan Size
 File Size
 Remove Background Color
 Passive Mode
 Port Number
You can set Passive Mode to Off or On depending on your FTP server and network firewall
configuration. By default, this setting is On. You can also change the port number used to access the
FTP server. The default for this setting is port 21. In most cases these two settings can remain set as
default.
NOTE
Scan to FTP is available when FTP server profiles are configured using Web Based Management.
e Click Submit.