Operation Manual

Chapter 3
16
Additional sending
operations 3
Sending a fax manually 3
Manual transmission 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a Load your document.
b Pick up the handset of an external
telephone and listen for a dial tone.
c Dial the fax number using the external
telephone.
d When you hear the fax tones, press
Fax Start.
 If you are using the scanner glass,
press Send.
e Replace the handset of an external
telephone.
Dual access 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing computer data. The Touchscreen will
show the new job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
NOTE
If you get an Out of Memory message
while scanning the first page of a fax,
press to cancel scanning. If you get an
Out of Memory message while
scanning a subsequent page, you can
press Send Now to send the pages
scanned so far, or press to cancel the
operation.