User Manual
Table Of Contents
- Basic User’s Guide MFC-9140CDN/MFC-9330CDW/MFC-9340CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General information
- Using the documentation
- Accessing Brother Utilities (Windows® 8)
- Accessing the Advanced User’s Guide, Software User’s Guide and Network User’s Guide
- How to access the User’s Guides for Advanced Features
- Accessing Brother Support (Windows®)
- Accessing Brother Support (Macintosh)
- Control panel overview
- Shortcut Settings
- Volume settings
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Using PC-FAX
- 7 Telephone and external devices
- 8 Dialling and storing numbers
- 9 Making copies
- 10 Printing data from a USB Flash memory drive or digital camera supporting mass storage (For MFC-9330CDW and MFC-9340CDW)
- 11 How to print from a computer
- 12 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
Routine maintenance
97
A
g Close the top cover of the machine.
h When you replace the belt unit with a
new one, you must reset the belt unit
counter. Instructions of how to do this
can be found in the box your new belt
unit came in.
Replacing the waste toner boxA
Model name: WT-220CL
The life of a waste toner box is approximately
50,000 A4 or Letter size single-sided pages.
WT Box End Soon A
If the Touchscreen shows
WT Box End Soon, it means the waste
toner box is near the end of its life. Buy a new
waste toner box and have it ready before you
get a Replace WT Box message.
Replace WT Box A
When the Replace WT Box message
appears on the Touchscreen, you must
replace the waste toner box.
a Make sure the machine is turned on.
b Open the top cover until it locks in the
open position.