User Manual
Table Of Contents
- Basic User’s Guide MFC-9140CDN/MFC-9330CDW/MFC-9340CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General information
- Using the documentation
- Accessing Brother Utilities (Windows® 8)
- Accessing the Advanced User’s Guide, Software User’s Guide and Network User’s Guide
- How to access the User’s Guides for Advanced Features
- Accessing Brother Support (Windows®)
- Accessing Brother Support (Macintosh)
- Control panel overview
- Shortcut Settings
- Volume settings
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Using PC-FAX
- 7 Telephone and external devices
- 8 Dialling and storing numbers
- 9 Making copies
- 10 Printing data from a USB Flash memory drive or digital camera supporting mass storage (For MFC-9330CDW and MFC-9340CDW)
- 11 How to print from a computer
- 12 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
114
p Use the numbered markers next to the
drum roller to find the mark. For
example, a dot in column 2 on the Drum
Dot Check Sheet would mean that there
is a mark in the "2" region of the drum.
q Turn the edge of the drum unit toward
you by hand while looking at the surface
of the suspected area.
NOTE
DO NOT touch the drum’s surface. To
avoid print quality problems, hold the
edges of the drum unit.
r When you have found the mark on the
drum that matches the Drum Dot Check
Sheet, wipe the surface of the drum
gently with a dry cotton swab until the
mark on the surface comes off.
IMPORTANT
DO NOT clean the surface of the
photosensitive drum with a sharp object or
any liquids.
s Turn the drum unit back over.