User Manual

172
Network
(continued)
Wi-Fi Direct
(MFC-9340CDW)
(continued)
Device
Information
(continued)
SSID — — Shows the SSID of
the Group Owner.
When the machine
is not connected,
Touchscreen
shows Not
Connected.
IP Address — — You can see the
current IP Address
of your machine.
Status
Information
Status — G/O Active(**)
Client Active
Not Connected
Off
Wired LAN Active
** = the number
of devices
You can see the
current Wi-Fi
Direct™ network
status.
Signal — Strong
Medium
Weak
None
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your machine
acts as the Group
Owner, the
Touchscreen
always shows
Strong.
I/F Enable ——On
Off*
Enable or Disable
the Wi-Fi Direct™
connection.
E-mail/IFAX
(Available
after IFAX is
downloaded)
Mail Address — — — Enter the mail
address (Up to 60
characters).
Setup Server SMTP SMTP Server Name
(Up to 64
characters)
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
Enter the SMTP
server address.
SMTP Port 25*
[1-65535]
Enter the SMTP
port number.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
Network User's Guide
Visit the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/.
The factory settings are shown in Bold with an asterisk.