User Manual

70
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Extension telephone
A telephone on the fax number that is
plugged into a separate wall socket.
External phone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine fast double-rings (when the
Receive Mode setting is Fax/Tel) to notify
you to pick up a voice call that it answered.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Fax Journal
Lists information about the last
200 incoming and outgoing faxes. TX
means Transmit. RX means Receive.
Fax Storage
You can store faxes in the memory.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 × 196 dpi. It is used for
small print and graphs.
Greyscale
The shades of grey available for copying
and faxing photographs.
Group number
A combination of One Touch and
Speed Dial numbers that are stored on an
One Touch key or in a Speed Dial location
for Broadcasting.
Help List
A printout of the complete Menu table that
you can use to program your machine
when you do not have the User’s Guides
with you.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
LCD (liquid crystal display)
The display screen on the machine that
shows interactive messages during
On-Screen Programming and shows the
date and time when the machine is idle.
Manual fax
When you lift the handset of your external
telephone so you can hear the receiving
fax machine answer before you press
Mono Start or Colour Start to begin
transmission.
Menu mode
Programming mode for changing your
machine’s settings.
OCR (optical character recognition)
ScanSoft™ PaperPort™ 12SE with OCR
or Presto! PageManager software
application converts an image of text to
text you can edit.
One Touch
Keys on the machine’s control panel
where you can store numbers for easy
dialling. You can store a second number
on each key if you press 21-40 and the
One Touch key together.