User Manual

5
4
Attach the control panel
cover (if needed)
a Open the document cover.
b Remove the control panel cover from the
machine and then attach the cover you
selected.
5
Connect the power cord
and telephone line
a Connect the AC power cord to the machine,
and then plug it into an electrical socket.
b Remove the label covering the machine's
power switch, and then switch the machine on.
c Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a telephone wall socket.
WARNING
The machine must be grounded using an
earthed plug.
Since the machine is grounded through the
electrical socket, you can protect yourself
from potentially hazardous electrical
conditions on the telephone network by
keeping the power cord connected to your
machine when you connect it to a telephone
line. Similarly, you can protect yourself when
you want to move your machine by
disconnecting the telephone line first and then
the power cord.
Note
If the control panel cover is not fitted correctly, the
key operations will not work.
IMPORTANT
DO NOT connect the interface
cable yet.
IMPORTANT
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the protective cap a from the EXT.
socket on the machine.
1 Extension telephone
2 External telephone
1
2
1