User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-9970CDW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Telephone line services
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing data from a USB Flash memory drive or digital camera supporting mass storage
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ
11
2
2
Loading paper and
print media
2
The machine can feed paper from the
standard paper tray, optional lower tray or
multi-purpose tray.
When you put paper into the paper tray, note
the following:
If your application software supports
paper size selection on the print menu,
you can select it through the software. If
your application software does not
support it, you can set the paper size in
the printer driver or by pressing the
buttons on the Touchscreen.
Loading paper in the standard
paper tray 2
You can load up to 250 sheets for Tray 1 and
500 sheets for the optional lower tray
(Tray 2). Paper can be loaded up to the
maximum paper mark (b b b) on the sliding
paper width guide. (For recommended paper
to use, see Paper capacity of the paper trays
on page 22.)
Printing on plain paper, thin paper or
recycled paper from the standard
paper tray (Tray 1) 2
a Pull the paper tray completely out of the
machine.
WARNING
DO NOT touch the shaded parts shown in
the illustration. These rollers may be
rotating at high speed.
Loading paper 2