User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-9970CDW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Telephone line services
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing data from a USB Flash memory drive or digital camera supporting mass storage
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ
Chapter 2
16
The side to be printed on must be
face up.
e Open the back cover (Face-up output
tray).
f Pull down the two grey levers, one on
the left-hand side and one on the right-
hand side, to the envelope position as
shown in the illustration below.
g Close the back cover.
h Send the print data to the machine.
i When you have finished printing, open
the back cover and reset the two grey
levers which were pulled down in
step f back to their original positions.
Note
• Remove each printed envelope
immediately to prevent a paper jam.
• If your thick paper curls during printing, put
only one sheet at a time in the MP tray and
open the back cover (face-up output tray)
to let the printed pages exit to the face-up
output tray.
1