User Manual

Chapter 2
12
b While pressing the green paper-guide
release lever (1), slide the paper guides
to fit the paper size you are loading in
the tray. Make sure that the guides are
firmly in the slots.
c Fan the stack of paper well to avoid
paper jams and misfeeds.
d Put paper in the tray and make sure:
 The paper is below the maximum
paper mark (b b b) (1).
Overfilling the paper tray will cause
paper jams.
 The side to be printed on must be
face down.
 The paper guides touch the sides of
the paper so it will feed properly.
e Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.
f Lift up the support flap (1) to prevent
paper from sliding off the face-down
output tray or remove each page as
soon as it comes out of the machine.
1
1
1