Software User's Guide

Network Scanning
238
13
For Touchscreen models 13
a Load your document.
b Press (SCAN).
c Press Scan to FTP.
d Press a or b to choose one of the FTP server profiles listed.
 If the Scan to FTP profile is complete, you will automatically go to step k.
 If the Scan to FTP profile is not complete, for instance, the quality or file type are not chosen, you will
be prompted to enter any missing information in the following steps.
e Choose one of the options below:
 Press d or c to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi or Gray 300 dpi. Go to step f.
 Press d or c to choose B&W 200 dpi or B&W 200x100 dpi. Go to step g.
f Press to choose PDF, PDF/A, Secure PDF, Signed PDF, JPEG or XPS.
Go to step h.
g Press to choose PDF, PDF/A, Secure PDF, Signed PDF or TIFF. Go to step h.
Note
• If you choose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 0-9 before
it starts scanning.
• If you choose Signed PDF, you must install and then configure a certificate to your machine using Web
Based Management.
h Enter the username.
Press OK and go to step i.
i Enter the password.
Press OK.
Do one of the following:
 If you choose color or gray in the resolution setting, go to step j.
 If you choose black and white in the resolution setting, go to step k.
j Press to choose Small, Middle or Large for the file size.
Go to step k.
k Do one of the following:
 If you want to change the file name, go to step l.
 If you want to start scanning, press Black Start or Color Start and go to step n.