User Manual

ManualsBrandsBrother ManualsAll in One PrinterMFC J220

Table Of Contents

Quick Setup Guide MFC-J220 MFC-J410

Start Here

MFC-J220

MFC-J410

Quick Setup Guide

SAF Version 0

Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation.

Unpack the machine and check the components

WARNING

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep

these bags away from babies and children.

 Most of the illustrations in this Quick Setup Guide show the MFC-J410.

a Remove the protective tape and film covering the machine, and also from the LCD.

b Remove the plastic bag a containing the ink cartridges from on top of the paper tray.

c Make sure you have all components.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death

or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor

or moderate injuries.

Inbox Ink Cartridges

[x4]

Black

Yellow

Cyan

Magenta

(Approx. 65% yield of the

replacement cartridge)

For details, see

Consumable items in the

Basic User’s Guide.

Quick Setup Guide

USB Interface Cable

Basic User’s Guide Safety and Legal

booklet

Installation CD-ROM

Documentation CD-ROM

Power Cord Telephone Line Cord

Note

• The components included in the box may differ depending on your country.

• Save all packing materials and the box in case for any reason you must ship your machine.

• Please use the supplied USB cable for a USB connection.

USB cable

Please make sure you use a USB 2.0 cable (Type A/B) that is no more than 2 metres long.

Summary of content (15 pages)

PAGE 1
Quick Setup Guide Start Here MFC-J220 MFC-J410 Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
PAGE 2
a 2 Load plain A4 paper d e Pull the paper tray a completely out of the machine. Fan the stack of paper well to avoid paper jams and misfeeds. Gently put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray. IMPORTANT DO NOT push the paper in too far. 1 b Lift the output paper tray cover a. 1 f c g h With both hands, gently press and slide the paper side guides a and then the paper length guide b to fit the paper size.
PAGE 3
Connect the power cord and telephone line IMPORTANT The telephone line cord MUST be connected to the socket on the machine marked LINE. IMPORTANT DO NOT connect the USB cable yet. a Connect the power cord. Note If you are sharing one telephone line with an external telephone, connect it as shown below. 1 2 WARNING The machine must be fitted with an earthed plug. b Connect the telephone line cord.
PAGE 4
Install the ink cartridges e Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum seal, then remove the cap a. CAUTION If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. a b Make sure that the power is turned on. The LCD shows No Ink Cartridge. Open the ink cartridge cover a. 1 1 c Remove the green protective part a.
PAGE 5
h 5 Gently push the ink cartridge until it clicks. After all the ink cartridges are installed close the ink cartridge cover. a Check the print quality When the preparation process has finished, the LCD shows Set Paper and Press Start. Press Colour Start. b Check the quality of the four colour blocks a on the sheet. (black/yellow/cyan/magenta) 1 Note The machine will prepare the ink tube system for printing. This process will take approximately four minutes. Do not turn off the machine.
PAGE 6
There are four possible receive modes: Fax Only, Fax/Tel, Manual and External TAD. Do you want to use the telephone features of your machine (if available) or an external telephone or external telephone answering device connected on the same line as the machine? Yes No Are you using the voice message function of an external telephone answering device? No Do you want the machine to answer fax and telephone calls automatically? Fax Only Your machine automatically answers every call as a fax.
PAGE 7
9 Enter personal information (Station ID) You should store your name and fax number to be printed on all fax pages that you send. a b Press Menu. Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Station ID. Press OK. d Enter your fax number (up to 20 digits) on the dial pad, and then press OK. To enter a “+” for international codes, press l. e Enter your name (up to 20 characters) using the dial pad, and then press OK. Note • See the following chart for entering your name.
PAGE 8
12 Set the telephone line type If you are connecting the machine to a line that features PBX or ISDN to send and receive faxes, it is necessary to change the telephone line type accordingly by completing the following steps. a b c d e 13 Set the phone line compatibility If you are connecting the machine to a VoIP service (over the Internet) you need to change the compatibility setting. Note Press Menu. Press a or b to choose Initial Setup. Press OK.
PAGE 9
USB Windows® For USB interface users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®/Windows® 7) 14 a Before you install • DO NOT connect the USB cable yet. • If there are any programs running, close them. • The screens may differ depending on your operating system. 15 • If the installation does not continue automatically, open the top menu again by ejecting and then reinserting the CD-ROM or double-click the start.
PAGE 10
USB 16 a Connect the USB cable Windows® c Carefully guide the USB cable through the trench as shown below, following the trench around and toward the back of the machine. Then connect the cable to your computer. Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. IMPORTANT b Connect the USB cable to the USB socket marked with a symbol. You will find the USB socket inside the machine as shown below.
PAGE 11
USB e The installation will continue automatically. The installation screens appear one after another. IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear. Windows® 17 a Finish and restart Click Finish to restart your computer. After restarting the computer, you must be logged on with Administrator rights.
PAGE 12
USB Macintosh For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x) 14 a Before you install b Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Connect the USB cable to the USB socket marked with a symbol. You will find the USB socket inside the machine as shown below. USB IMPORTANT • For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/ • For Mac OS X 10.4.0 to 10.4.
PAGE 13
USB d Macintosh Lift the scanner cover to release the lock a. Gently push the scanner cover support down b and close the scanner cover c. e When this screen appears, click Next. 1 2 3 f When the Brother Support screen appears, click Close to finish the installation or go to step 17. 17 a b c d Put the supplied installation CD-ROM into your CD-ROM drive. When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2.
PAGE 14
Install Optional Applications 1 Install FaceFilter Studio/BookScan & Whiteboard Suite supported by Reallusion, Inc FaceFilter Studio is an easy-to-use borderless photo printing application. FaceFilter Studio also lets you edit your photo data and add photo effects such as red eye reduction or skin tone enhancement. The BookScan Enhancer software can correct your scanned book images automatically. The Whiteboard Enhancer software cleans up and enhances text and images from photos taken of your whiteboard.
PAGE 15
Consumables Replacement consumables When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more information about the ink cartridges for your machine, visit http://www.brother.com/original/ or contact your local Brother re-seller. Ink cartridge Black Yellow Cyan Magenta LC39BK LC39Y LC39C LC39M What is Innobella™? Innobella™ is a range of genuine consumables offered by Brother.