User Manual

Chapter 8
42
Copy settings 8
You can change the following copy settings.
Press COPY and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
(Basic User’s Guide)
For details about changing the following copy
settings, see page 42.
 Paper Type
 Paper Size
(Advanced User’s Guide)
For details about changing the following copy
settings, see chapter 7:
 Quality
 Enlarge/Reduce
 Density
 Stack/Sort (MFC-J410W and
MFC-J415W only)
 Page Layout
 Set New Default
 Factory Reset
Note
If you want to sort copies, use the ADF.
(MFC-J410W and MFC-J415W only)
Paper Options 8
Paper Type 8
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Type.
Press OK.
e Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
f If you do not want to change additional
settings, press Black Start or
Color Start.
Paper Size 8
If you are copying on paper other than Letter
size, you will need to change the paper size
setting. You can copy only on Letter, Legal,
A4, A5, Executive or Photo 4"  6"
(10  15 cm) paper.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Size.
Press OK.
e Press a or b to choose Letter, Legal,
A4, A5, EXE or 4"x6".
Press OK.
f If you do not want to change additional
settings, press Black Start or
Color Start.