User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Support
- Using FaceFilter Studio for photo printing by REALLUSION
- Scanning
- ControlCenter3
- Remote Setup (Not available for MFC-J220, MFC-J265W and MFC-J410)
- Brother PC-FAX Software
- PhotoCapture Center™
- Firewall settings (For Network users)
- Printing
- Apple Macintosh
- Printing and Faxing
- Scanning
- ControlCenter2
- Remote Setup & PhotoCapture Center™
- Using the Scan key
- Index
- brother CHN-ENG
Remote Setup & PhotoCapture Center™
168
11
PhotoCapture Center™ 11
You can access a memory card or a USB Flash memory drive installed in the machine from a Macintosh.
CAUTION
DO NOT start your Macintosh with a memory card or a USB Flash memory drive installed in the media drive
of the machine. You could lose your data or damage the media.
Note
• The PhotoCapture Center™ will read only the media that was put in first.
• MFC-J220, MFC-J265W and MFC-J410 do not support using a USB Flash memory drive.
• While the machine is printing from the PhotoCapture Center™, your Macintosh cannot access the
PhotoCapture Center™ for any other operation.
For USB cable users 11
a Put a memory card or USB Flash memory drive into your machine.
Note
If you create a name for the volume label of the memory card or USB Flash memory drive, the name
appears instead of “Removable Disk”.
b Double-click the Removable Disk icon. The files and folders on the memory card or USB Flash memory
drive appear on your screen.
c You can edit a file and save it to another drive on your Macintosh.