User Manual

Network Scanning (For models with built-in network support)
186
13
Using the Scan key on your network 13
Note
If you are connected using USB, see USB cable scanning on page 172.
Scan to E-mail (PC) 13
When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the computer you
designated on your network. The ControlCenter software will launch the default E-mail application on the
designated computer. You can scan and send a black and white or colour document from the computer as
an E-mail attachment.
a Load your document.
b Press (SCAN).
c Press a or b to choose Scan to E-mail.
Press OK.
d Press a or b to choose the destination computer you want to use for E-mailing your document.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.
e Press Mono Start or Colour Start.
The machine starts the scanning process.
Note
• Scan type depends on the settings of the Device Button tab, Mono Start or Colour Start do not change
the settings.
• If you want to change between colour and black and white scanning, choose colour or black and white in
the scan type option on the Device Button tab of the ControlCenter configuration screen. (For Windows
®
,
see SCAN on page 54. For Macintosh, see SCAN on page 149.)