User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J220 MFC-J265W MFC-J270W MFC-J410W MFC-J415W
- Brother numbers
 - Ordering accessories and supplies
 - Notice - Disclaimer of Warranties (USA and Canada)
 - Compilation and Publication Notice
 - BROTHER MULTIFUNCTION CENTER / FAX MACHINE LIMITED WARRANTY (Canada only)
 - User's Guides and where do I find it?
 - Table of Contents
 - 1 General information
 - 2 Loading paper
 - 3 Loading documents
 - 4 Sending a fax
 - 5 Receiving a fax
 - 6 Telephone services and external devices
 - 7 Dialing and storing numbers
 - 8 Making copies
 - 9 PhotoCapture Center®: Printing photos from a memory card
 - 10 How to print from a computer
 - 11 How to scan to a computer
 - A Routine maintenance
 - B Troubleshooting
 - C Menu and features
 - D Specifications
 - Index
 - brother CAN-ENG
 
 
58
Out of Memory The machine's memory is full. When copy operation is in progress, press 
Stop/Exit and wait until the other 
operations in progress finish and then try 
again.
The memory card you are using 
does not have enough free space 
to scan the document.
Delete unused files from your memory card 
to make some free space and then try 
again.
Paper Jam Paper is jammed in the machine. Open the Jam Clear Cover (at the back of 
the machine) and pull out the jammed 
paper by following the steps in Printer jam 
or paper jam on page 61. 
Make sure the paper length guide is set to 
the correct paper size. 
DO NOT extend the paper tray when you 
load A5 or smaller size paper.
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
The machine has a mechanical 
problem.
—OR—
A foreign object such as a paper 
clip or ripped paper is in the 
machine.
Open the scanner cover and remove any 
foreign objects and paper scraps from 
inside the machine. If the error message 
continues, see Transferring your faxes or 
Fax Journal report on page 59 before 
disconnecting the machine so you will not 
lose any important messages. Then, 
disconnect the machine from the power for 
several minutes and reconnect it.
Wrong Paper Size Paper is not the correct size. Check that the Paper Size setting matches 
the size of paper in the tray. Load the 
correct size of paper, and then press 
Black Start or Color Start. (See Paper 
Size on page 15.)
Error Message Cause Action










