User Manual

20
3
How to load
documents
3
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF
(MFC-J415W only) 3
The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 20 lb
(80 g/m
2
) paper and always fan the pages
before putting them in the ADF.
Document Sizes Supported 3
How to load documents 3
IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or correction
fluid are completely dry.
a Unfold the ADF Document Output
Support Flap (1).
b Fan the pages well.
c Adjust the paper guides (2) to fit the
width of your document.
d Make sure you place your document,
face down, top edge first in the ADF
underneath the guides until you feel it
touch the feed roller and the LCD shows
ADF Ready.
IMPORTANT
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass 3
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported 3
Loading documents 3
Paper:
20 lb LTR (80 g/m
2
A4)
Length: 5.8 to 14 in. (148 to 355.6 mm)
Width: 5.8 to 8.5 in. (148 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m
2
)
Length: Up to 11.7 in. (297 mm)
Width: Up to 8.5 in. (215.9 mm)
Weight: Up to 4.4 lb (2 kg)
1
2