Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Definitions of warnings, cautions, and notes
 - Compilation and publication notice
 - IMPORTANT NOTE
 - Brother numbers
 - Table of Contents
 - 1 Introduction
 - 2 Configuring your machine for a network with an Ethernet cable connection (DCP-J715W, MFC-J615W and MFC-J630W only)
- Overview
 - IP addresses, subnet masks and gateways
 - Step by step chart
 - Setting up the IP address and subnet mask
 - Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
 - Using the BRAdmin Professional 3 utility to change the wireless settings (Windows®)
 - Using the Remote Setup to change the print server settings (MFC-J615W and MFC-J630W only) (Not available for Windows Server® 2003/2008)
 - Using the control panel to change the print server settings
 
 
 - 3 Configuring your machine for a wireless network
- Overview
 - Wireless network terms and concepts
 - Step by step chart for wireless network configuration
 - Confirm your network environment
 - Confirm your wireless network setup method
- Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine
 - Configuration using the WPS/AOSS™ control panel menu (Infrastructure mode only)
 - Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
 - Configuration using the Brother installer application on the installation CD-ROM to configure your wireless network machine
 
 - Configuring your machine for a wireless network
- Using the Setup Wizard from the control panel
 - Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network
 - Using the PIN Method of Wi-Fi Protected Setup
 - Using the Brother automatic installer application on the installation CD-ROM to configure your machine for a wireless network
 
 
 - 4 Wireless configuration using the Brother installer application
 - 5 Control panel setup
- Network menu
 - Restoring the network settings to factory default
 - Printing the Network Configuration List
 - Printing the WLAN Report
 
 - 6 Driver Deployment Wizard (Windows® only)
 - 7 Network printing from Windows® basic TCP/IP Peer-to-Peer printing
 - 8 Network printing from a Macintosh
 - 9 Troubleshooting
 - Appendix A
 - Appendix B
 - Index
 
 
i
Definitions of warnings, cautions, and notes
We use the following icon throughout this User’s Guide:
Compilation and publication notice
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the 
latest product’s descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained 
herein and shall not be responsible for any damages (including consequential) caused by reliance on the 
materials presented, including but not limited to typographical and other errors relating to the publication.
©2010 Brother Industries, Ltd.
IMPORTANT NOTE
 This product is approved for use in the country of purchase only. Do not use this product outside the 
country of purchase as it may violate the wireless telecommunication and power regulations of that 
country.
 Windows
®
 XP in this document represents Windows
®
 XP Professional, Windows
®
 XP Professional x64 
Edition and Windows
®
 XP Home Edition.
 Windows Server
®
 2003 in this document represents Windows Server
®
 2003, Windows Server
®
 2003 x64 
Edition, Windows Server
®
 2003 R2 and Windows Server
®
 2003 R2 x64 Edition.
 Windows Server
®
 2008 in this document represents Windows Server
®
 2008 and Windows Server
®
 2008 
R2.
Notes tell you how you should respond to a situation that may arise or give tips 
about how the operation works with other features.










