User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Trial Photo Print (Not available for MFC-J430W/J5910DW)
- Using FaceFilter Studio for photo printing by REALLUSION
- Using Homepage Print 2 by Corpus (Not available for MFC-J5910DW)
- 2 Scanning
- 3 ControlCenter4
- 4 Remote Setup (For MFC-J625DW/J825DW/J5910DW)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™ (For MFC-J625DW/J825DW/J5910DW)
- Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan key on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Printing on a Disc
- Index
- brother CHN-ENG
ControlCenter4
79
3
Opening the scanned image in an application 3
The (Image) button lets you scan an image directly into your graphics application for image editing.
a Select the Scan tab.
b If you want to change the scan settings, right-click (Image) and then change the settings. If you want
to preview and configure the scanned image, check PreScan. Click OK.
c Click (Image).
d The image will appear in the application you have chosen.
Using the OCR feature 3
The (OCR) button lets you scan a document and converts it into text. This text can be edited using a word
processing software of your choice.
a Select the Scan tab.
b If you want to change the scan settings, right-click (OCR) and then change the settings. If you want
to preview and configure the scanned image, check PreScan. Click OK.
c Click (OCR).
d Your default word processing application will open and display the converted text data.
Attaching the scanned data to E-mail 3
The (E-mail) button lets you scan a document to your default E-mail application, so you can send the
scanned job as an attachment.
a Select the Scan tab.
b If you want to change the scan settings, right-click (E-mail) and then change the settings. If you want
to preview and configure the scanned image, check PreScan. Click OK.
c Click (E-mail).
d Your default E-mail application will open and the image will be attached to a new, blank E-mail.