Installation Instructions

6
5
Check the print quality
a When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Colour Start.
b Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to step 6.
If you can see missing short lines, press 2 (No)
and follow the steps on the LCD.
6
Wireless setup
(if needed)
For wireless setup using a Macintosh computer or
mobile device, go to a.
For Windows users (all connections) and Macintosh
USB connections, go to b.
a If you are using a Macintosh computer or a
mobile device on a wireless network, press
OK.
Press a or b to choose Yes.
Press OK.
Then go to step 16 on page 19 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step 7 to finish the machine setup.
b If you are using a Windows
®
computer or want
to connect your Macintosh using USB, press
OK.
Press a or b to choose No.
Press OK.
Then go to step 7.
The wireless setup for Windows
®
users will be
covered in later steps.
OK
Poor
Note
You can choose No to configure the wireless
settings later.