Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable
- Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Configuration using the machine’s control panel Setup Wizard
- Configuration in Ad-hoc Mode
- 4 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration Report
- Printing the WLAN Report
- Function table and default factory settings
- 5 Web Based Management (MFC-J5910DW only)
- 6 Internet fax (MFC-J5910DW only)
- 7 Security features (MFC-J5910DW only)
- 8 Troubleshooting
- Appendix A
- Index
Control panel setup
38
4
Mail Address 4
You can set your machine’s E-mail address.
Setup Server 4
SMTP Server 4
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
SMTP Port
4
This field displays the SMTP port number (for outgoing E-mails) on your network.
Auth. for SMTP 4
You can specify the security method for E-mail notification. (For details on the security methods for E-mail
notification, see Sending an E-mail securely uu page 71.)
POP3 Server 4
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
POP3 Port
4
This field displays the POP3 port number (for incoming E-mails) used by the Brother machine.
Mailbox Name
4
You can specify a mailbox name on the POP3 server where the Internet print jobs are to be retrieved.
Mailbox Pwd
4
You can specify the password for the POP3 server account where the Internet print jobs are to be retrieved.
Note
To set for no password, enter a single space.
APOP 4
You can enable or disable the APOP (Authenticated Post Office Protocol).
Setup Mail RX 4
Auto Polling 4
When set to On, the machine automatically checks the POP3 server for new messages.