Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Applicable models
 - Definitions of notes
 - Compilation and publication notice
 - IMPORTANT NOTE
 - Table of Contents
 - 1 Introduction
 - 2 Changing your machine’s network settings
 - 3 Configuring your machine for a wireless network
- Overview
 - Confirm your network environment
 - Wireless configuration temporarily using a USB cable
 - Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW)
 - One push configuration using Wi-Fi Protected Setup or AOSS™
 - Configuration using the machine’s control panel Setup Wizard
 - Configuration in Ad-hoc Mode
 
 - 4 Control panel setup
- Network menu
 - Restoring the network settings to factory default
 - Printing the Network Configuration Report
 - Printing the WLAN Report
 - Function table and default factory settings
 
 - 5 Web Based Management (MFC-J5910DW only)
 - 6 Internet fax (MFC-J5910DW only)
 - 7 Security features (MFC-J5910DW only)
 - 8 Troubleshooting
 - Appendix A
 - Index
 
 
Internet fax (MFC-J5910DW only) 
68
6
Relay broadcast from a computer 6
1 Internet
You can also send E-mail from your computer and have it relayed to a conventional fax machine. The method 
of entering the phone number of the conventional fax machine that will receive the relayed E-mail will vary 
depending on the mail application you are using. The following are some examples of different mail 
applications:
Some E-mail applications do not support sending to multiple phone numbers. If your E-mail application 
cannot support multiple phone numbers you will only be able to relay to one fax machine at a time.
Enter the address of the relay machine and phone number of the fax in the “TO” box using the same method 
used when sending from a machine.
UKFAX@brother.co.uk(fax#123456789)
Note
For Microsoft
®
 Outlook
®
 97 or greater, the address information must be entered into the address book as 
follows:
Name: fax#123456789
E-mail address: UKFAX@brother.co.uk
TX Verification Mail 6
Transmission Verification Mail supports two separate functions. Verification Mail for sending allows you to 
request notification from the receiving station that the Internet Fax or E-mail was received and processed. 
Verification Mail for receiving allows you to transmit a default report back to the sending station after 
successfully receiving and processing an Internet Fax or E-mail.
To use this feature you must set the Notification option within the Setup Mail RX and 
Setup Mail TX options.
1
UKFAX@brother.co.uk 123456789
UKFAX@brother.co.uk(fax#123456789)










