Operation Manual

Telephone and external devices
35
6
Inadvisable connection of extension
sockets (Fig. 1.)
6
1 Extension socket
2 Master socket
3 Incoming line
Recommended connection of extension
sockets (Fig. 2.)
6
1 Extension socket
2 Master socket
3 Incoming line
The fax machine must be plugged into the
master socket.
Note
These telephones are now connected as
external devices (see Connecting an
external or extension telephone
uu page 33), because they are
connected to the fax machine via the
T-connector.
Using a cordless external
telephone 6
Once the base unit of the cordless telephone
has been connected to the same telephone
line as the machine (see External and
extension telephones uu page 33), it is
easier to answer calls during the Ring Delay
if you carry the cordless handset around with
you.
If you let the machine answer first, you will
have to go to the machine and press Tel/R to
send the call to the cordless handset.
Using remote codes 6
Remote Activation Code 6
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 51. Wait for the chirping sounds then
replace the handset. (See Fax Detect
uu page 29.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Mono Start and 2
to choose Receive.
Remote Deactivation Code 6
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
Ring (fast double-ring), after the initial Ring
Delay. If you pick up the call on an extension
telephone you can turn the F/T Ring off by
pressing #51 (make sure you press this
between the rings).
If the machine answers a voice call and fast
double-rings for you to take over, you can
take the call at the external telephone by
pressing Tel/R.
FAX
11
2
3
FAX
11
2
3