User Manual
Table Of Contents
- Product Safety Guide
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your machine
- General precautions
- Connecting the machine safely
- Servicing the machine
- Important Safety Instructions
- Product Warranty & Liability
- Trademarks
- Open Source Licensing Remarks
- Other Information (MFC-J825DW/J5910DW only)
- Unlawful use of copying equipment
- brother CHN-ENG
7
Connecting the machine safely
1
WARNING
There are high-voltage electrodes inside the machine. Before you access the inside of the
machine, including for routine maintenance such as cleaning, make sure you have unplugged
the power cord from the electrical socket, as well as any telephone or Ethernet (Network models
only) cables from the machine.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
This machine should be connected to an adjacent grounded AC power source within the range
indicated on the rating label. DO NOT connect it to a DC power source or inverter. Doing this
might cause an electrical shock. If you are not sure what kind of power source you have, contact
a qualified electrician.