User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Trial Photo Print (Not available for MFC-J430W/J5910DW)
- Using FaceFilter Studio for photo printing by REALLUSION
- Using Homepage Print 2 by Corpus (Not available for MFC-J5910DW)
- 2 Scanning
- 3 ControlCenter4
- 4 Remote Setup (For MFC-J625DW/J825DW/J5910DW)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™ (For MFC-J625DW/J825DW/J5910DW)
- Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan key on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Printing on a Disc
- Index
- brother CHN-ENG
Brother PC-FAX Software (MFC models only)
111
5
Configuring the Network PC-FAX Receiving Settings 5
The settings to send received faxes to your computer were automatically configured during the installation of
MFL-Pro Suite. uuQuick Setup Guide
If you are using a different machine than the one that was registered to your computer during the installation
of the MFL-Pro Suite software, follow the steps below.
a In the PC-Fax Rx Setup dialog box, click Network Settings. The Network Settings dialog box
appears.
b You must specify the IP address or node name of your machine.
Choose the appropriate connection method.
Specify your machine by address
Enter the IP address of the machine in IP Address.
Specify your machine by name
Enter the machine’s node name in Node Name, or click Browse and choose the correct Brother
machine you want to use from the list.
Display Your PC Name
You can specify the computer name that will appear on the display of the machine. To change the name,
enter the new name in Display Your PC Name.