User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Trial Photo Print (Not available for MFC-J430W/J5910DW)
- Using FaceFilter Studio for photo printing by REALLUSION
- Using Homepage Print 2 by Corpus (Not available for MFC-J5910DW)
- 2 Scanning
- 3 ControlCenter4
- 4 Remote Setup (For MFC-J625DW/J825DW/J5910DW)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™ (For MFC-J625DW/J825DW/J5910DW)
- Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan key on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Printing on a Disc
- Index
- brother CHN-ENG
USB cable scanning
193
12
g The file name is set automatically. However, you can create a name of your choice using the character
keys on the control panel. Press File Name and then enter the file name. You can only change the first
6 digits of the file name.
Press OK.
h Press Mono Start or Colour Start to start scanning. If you are using the scanner glass, the LCD displays
Next Page?. Press Yes or No. After you finish scanning, make sure you choose No before removing
the USB Flash memory drive or memory card from the machine.
Note
Scan type depends on the settings you choose in step e to f, Mono Start or Colour Start does not
change the setting.
For MFC-J625DW/J5910DW 12
a Put a memory card or USB Flash memory drive into your machine.
CAUTION
DO NOT take out the memory card or USB Flash memory drive while the status LED or the PHOTO key is
blinking to avoid damaging the card, USB Flash memory drive or data stored on the card.
If you take out the memory card or USB Flash memory drive while the status LED or the PHOTO key is
flashing, you must restart your computer at once before putting the same memory card or USB Flash
memory drive into the machine. If you do not restart your computer, the data on your media may be
destroyed.
b Load your document.
c Press (SCAN).
d Press Scan to Media.
Do one of the following:
If you want to change the quality, press Options, and then go to e.
Press Start to start scanning without changing additional settings. Go to i.
e Press a or b to choose Quality and then the quality you want.
Do one of the following:
If you want to change the file type, go to f.
Press and then Start to start scanning without changing additional settings. Go to i.
f Press a or b to choose File Type and then the file type you want.
Do one of the following:
If you want to change the file name, go to g.
Press and then Start to start scanning without changing additional settings. Go to i.