User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Trial Photo Print (Not available for MFC-J430W/J5910DW)
- Using FaceFilter Studio for photo printing by REALLUSION
- Using Homepage Print 2 by Corpus (Not available for MFC-J5910DW)
- 2 Scanning
- 3 ControlCenter4
- 4 Remote Setup (For MFC-J625DW/J825DW/J5910DW)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™ (For MFC-J625DW/J825DW/J5910DW)
- Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan key on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Printing on a Disc
- Index
- brother CHN-ENG
Printing on a Disc (MFC-J825DW only)
223
14
Print by copying 14
You can copy the image of an existing disc label or a square document such as a photo and print the image
on a to printable disc.
Note
• Make sure the ADF is empty.
• You can copy 12 cm disc label images.
Copying a disc label or document image 14
a Press Disc.
Note
You can also begin the print procedure by opening the Disc Guide.
b Do one of the following:
If you want to copy a disc label image, press Copy from disc.
If you want to copy a document image, press Copy from photo.
The LCD asks you to make space behind the Brother machine.
Press OK.
Note
Make sure that there is over 10 cm of free space behind the machine.
c The LCD asks you to open the scanner cover and remove the Disc Tray.
Press OK.
d The LCD asks you to set the internal and external diameter in the next screen.
Press OK.
e Press a or b to set the outside and inside diameter of the printable area of the disc.
Press OK.
Note
Refer to the package of the printable disc for the outside and inside diameter measurements.