User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Trial Photo Print (Not available for MFC-J430W/J5910DW)
- Using FaceFilter Studio for photo printing by REALLUSION
- Using Homepage Print 2 by Corpus (Not available for MFC-J5910DW)
- 2 Scanning
- 3 ControlCenter4
- 4 Remote Setup (For MFC-J625DW/J825DW/J5910DW)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™ (For MFC-J625DW/J825DW/J5910DW)
- Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan key on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Printing on a Disc
- Index
- brother CHN-ENG
Printing on a Disc (MFC-J825DW only)
230
14
d The message dialog asks you to use the Brother supplied CD labeler software to print on printable disc
media.
Click OK.
e Click OK.
f The message dialog asks you to make space behind the Brother machine.
Click OK.
g The LCD on the Brother machine asks you to make space behind the Brother machine.
Press OK.
h The LCD on the Brother machine asks you to open the scanner cover and remove the Disc Tray.
Press OK.
i The LCD on the Brother machine asks you to load a printable disc on the tray.
Load a printable disc on the tray. (See How to load a printable disc uu page 220)
Press OK.
j Press Mono Start or Colour Start.
The machine starts printing on the disc.
Do one of the following:
If you are printing only one disc, the finished message appears on the LCD of the machine. Press OK.
If you are printing more than one disc, the LCD message prompts you to set the next disc. Replace
the disc with a new one and press OK, and then press Mono Start or Colour Start. The machine
starts printing on the next disc. (Repeat this step for each additional disc.)
Note
• Use the Brother supplied disc print software to print on a CD/DVD/BD. Printing from other applications can
stain the inside of the machine.
• If the printed image runs off the edges of the disc, you may need to adjust the print position. (See Adjust
the print position uu page 225.)