User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Trial Photo Print (Not available for MFC-J430W/J5910DW)
- Using FaceFilter Studio for photo printing by REALLUSION
- Using Homepage Print 2 by Corpus (Not available for MFC-J5910DW)
- 2 Scanning
- 3 ControlCenter4
- 4 Remote Setup (For MFC-J625DW/J825DW/J5910DW)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™ (For MFC-J625DW/J825DW/J5910DW)
- Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan key on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Printing on a Disc
- Index
- brother CHN-ENG
Scanning
48
2
Scanning a document using the WIA driver 2
WIA compliant 2
For Windows
®
XP/Windows Vista
®
/Windows
®
7 you can choose Windows
®
Imaging Acquisition (WIA) when
scanning images. You can scan images directly into the Presto! PageManager viewer that Brother included
with your machine or you can scan images directly into any other applications that support WIA or TWAIN
scanning.
Scanning a document into the computer 2
There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass. (See Pre-Scanning and cropping a portion using the scanner glass uu page 50.)
a Load your document.
b Start the Presto! PageManager software that was installed during the MFL-Pro Suite installation to scan
a document.
Note
• Depending on your model Presto! PageManager may not be included. If it is not included, please use other
software applications that support scanning.
• The instructions for scanning in this guide are based on Presto! PageManager. The process will vary when
scanning from other applications.
c Click File, then Select Source.
d Choose the scanner you are using from the Select Source list.
Note
Choose WIA-Brother MFC-XXXX or WIA-Brother MFC-XXXXLAN.
e Check File, Scan Settings and uncheck Suppress Twain UserInterface. Click OK.
f Click Acquire Image Data.
The Scanner Setup dialog box appears.