User Manual

Table Of Contents
Network Scanning
207
13
Using the Scan key on your network 13
Note
If you are connected using USB, see USB cable scanning uu page 189.
Scan to E-mail (PC) 13
When you choose Scan to E-mail (PC), your document will be scanned and sent directly to the computer you
designated on your network. The ControlCenter software will launch the default E-mail application on the
designated computer. You can scan and send a black and white or colour document from the computer as
an E-mail attachment.
For MFC-J825DW/DCP-J925DW
13
a Load your document.
b Press (SCAN) or Scan.
c Press d or c to display to Em ail.
d Press to Email.
e Press a or b to display the destination computer you want to use for E-mailing your document.
f Press the destination computer and then press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.
g Press Mono Start or Colour Start.
The machine starts the scanning process.
For MFC-J625DW/J5910DW/DCP-J525W/J725DW
13
a Load your document.
b Press (SCAN) or Scan.
c Press a or b to display Scan to email.
d Press Scan to email.
e Press PC. (For MFC-J5910DW)
Press a or b to display the destination computer you want to use for E-mailing your document.
f Press the destination computer.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.