User Manual

Printing on a Disc (MFC-J825DW/DCP-J925DW only)
233
14
k Make sure the image you want to print is inside of the frame on the LCD. The area enclosed within the
frame will be printed.
 Press a or b, d or c to move the position of the image.
 Press + or - to change the image size.
Do one of the following:
 If you want to do a test print on paper, press TestPrint and go to l.
 If you want to print the disc, press OK and go to n.
Note
If the Disc Guide opens, close the guide before performing a test print.
l If a disc is in the Disc Tray, remove the disc.
Make sure A4 paper is set in the paper tray.
Press Colour Start.
The machine starts printing the test image.
Note
You can only use A4 size paper for a test print.
m Do one of the following:
 If the test print result is OK, press OK and go to n.
 If the test print result is not OK, readjust the printable area of the image.
Go to k.
n Enter the number of copies you want either by pressing the number box directly, or pressing + or -, and
then do one of the following:
 If you want to change the print settings, press PrintSetting and go to o.
 If you do not want to change any settings, go to q.
o Choose your printable disc type.
 If you chose Printable Disc, go to p.
 If you chose Glossy Disc, go to q.
p Press Normal or Slow Drying.
Use Slow Drying if the print is smudged.
q Press Print Disc.
r Load a printable disc on the tray. (See How to load a printable disc uu page 226.)
Press OK.