User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Trial Photo Print (Not available for MFC-J430W/J432W/J5910DW)
- Using FaceFilter Studio for photo printing by REALLUSION
- Using Homepage Print 2 by Corpus (Not available for MFC-J5910DW)
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver
- Scanning a document using the WIA driver (Windows® Photo Gallery and Windows® Fax and Scan users)
- Using ScanSoft™ PaperPort™12SE with OCR by NUANCE™ (Not available for DCP-J525W)
- Using BookScan Enhancer and Whiteboard Enhancer by REALLUSION
- 3 ControlCenter4
- Overview
- Using ControlCenter4 in Home Mode
- Photo tab
- Scan tab
- PC-FAX tab (For MFC models)
- Device Settings tab
- Support tab
- Using ControlCenter4 in Advanced Mode
- Scan tab
- PC-Copy tab
- Photo tab
- PC-FAX tab (For MFC models)
- Device Settings tab
- Support tab
- Custom tab
- 4 Remote Setup (For MFC-J625DW/J825DW/J5910DW)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™ (For MFC-J625DW/J825DW/J5910DW/DC P-J725DW/J925DW)
- 7 Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan key on your network
- Scan to E-mail (PC)
- Scan to E-mail (E-mail Server) (For MFC-J5910DW)
- Scan to Image
- Scan to OCR (Not available for DCP-J525W)
- Scan to File
- Scan to FTP (For MFC-J5910DW)
- Scan to FTP using FTP Server Profiles (For MFC-J5910DW)
- Scan to Network (For MFC-J5910DW)
- Scan to Network using Scan to Network Profiles (For MFC-J5910DW)
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Printing on a Disc
- Index
- brother UK
ControlCenter4
90
3
OCR tab (Not available for DCP-J525W) 3
Lets you configure settings for Scan to OCR by pressing the SCAN key on your Brother machine.
Choose the settings for File Type, Target Application, OCR Language, Resolution, Scan Type,
Document Size, Brightness and Contrast as needed. Click OK.
E-mail tab
3
Lets you configure settings for Scan to E-mail by pressing the SCAN key on your Brother machine.
Choose the settings for File Type, File size, Resolution, Scan Type, Document Size, Brightness,
Contrast and Auto Crop as needed. Click OK.
Note
You can change the data compression ratio of the scanned image with File size.
File tab 3
Lets you configure settings for Scan to File by pressing the SCAN key on your Brother machine.
Choose the settings for File Type, File Name, Destination Folder, Show Folder, File size, Resolution,
Scan Type, Document Size, Brightness, Contrast and Auto Crop as needed. Click OK.
Note
• If Show Folder is checked, the destination of the scanned image to save will be shown after scanning.
• You can change the data compression ratio of the scanned image with File size.
Launching the BRAdmin utility 3
If you have installed BRAdmin Light or BRAdmin Professional 3, the (BRAdmin) button lets you open
the BRAdmin Light or BRAdmin Professional 3 utility.
The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It also can
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as IP address. Refer to the guide noted below for information about installing BRAdmin Light from the
supplied CD-ROM.
uuNetwork User’s Guide
If you require more advanced machine management, use the latest version of BRAdmin Professional 3 that
is available as a download from http://solutions.brother.com/
.
a Select the Device Settings tab.
b Click (BRAdmin). The BRAdmin Light or BRAdmin Professional 3 utility dialog appears.
Note
If you have installed both BRAdmin Light and BRAdmin Professional, ControlCenter4 will launch BRAdmin
Professional 3.