Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable
- Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Configuration using the machine’s control panel Setup Wizard
- Configuration in Ad-hoc Mode
- 4 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration Report
- Printing the WLAN Report
- Function table and default factory settings
- 5 Web Based Management (MFC-J5910DW only)
- 6 Internet fax (MFC-J5910DW only)
- 7 Security features (MFC-J5910DW only)
- 8 Troubleshooting
- Appendix A
- Index
Internet fax (MFC-J5910DW only)
66
6
Additional Internet Fax options 6
Forwarding received E-mail and fax messages 6
You can forward received E-mail or standard fax messages to another E-mail address or fax machine.
Received messages can be forwarded via E-mail to a computer or Internet fax. They can also be forwarded
via standard phone lines to another machine.
The setting can be enabled using a web browser or through the control panel of the machine. The steps for
configuring fax forward can be found in the Advanced User’s Guide.
Please see the Advanced User’s Guide to check that this feature is supported.
Relay broadcasting 6
This function allows the Brother machine to receive a document over the Internet, and then relay it to other
fax machines through conventional telephone lines.
Before relaying broadcast 6
To relay broadcast, you must configure following items from the control panel, Web Based Management or
Remote Setup:
Relay Broadcast
You must enable the relay broadcast.
Relay Domain
You must configure your machine’s domain name on the machine that will broadcast the document to the
conventional fax machine. If you wish to use your machine as a relay broadcast device, you must specify
the domain name that you trust at the machine, in other words, the portion of the name after the “@” sign.
Use care in selecting a trusted domain since any user on a trusted domain will be able to send a relay
broadcast.
You can register up to 5 domain names.
Relay Report
Relay broadcast from a machine 6
1 Internet
FAX@brother.com UKFAX@brother.co.uk 123456789
UKFAX@brother.co.uk(fax#123456789)
1