Operation Manual

Chapter 10
32
Receive Mode settings 10
Ring Delay 10
Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, choose the maximum number of
rings.
(See Online User’s Guide.)
a Press (Settings).
b Press All Settings.
c Press a or b to display Fax.
d Press Fax.
e Press a or b to display
Setup Receive.
f Press Setup Receive.
g Press a or b to display Ring Delay.
h Press Ring Delay.
i Press a or b to display the options, and
then press the number of times the
machine will ring before it answers.
If you select 0, the machine will answer
immediately and the line will not ring at
all.
j Press .
F/T Ring Time
(Fax/Tel mode only) 10
When your machine receives a call, you and
your caller will hear the normal telephone
ring. The number of rings is set in the ring
delay setting.
If the call is a fax, then your machine will
receive it. However, if it is a voice call then the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T
Ring, it means that you have a voice caller on
the line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring. However, you can still answer
the call on any telephone by using a remote
code.
(See Online User’s Guide.)
a Press (Settings ).
b Press All Settings.
c Press a or b to display Fax.
d Press Fax.
e Press a or b to display
Setup Receive.
f Press Setup Receive.
g Press a or b to display
F/T Ring Time.
h Press F/T Ring Time.
i Press 20, 30, 40 or 70 seconds.
j Press .
NOTE
Even if the caller hangs up during the fast
double-ring, the machine will continue to
ring for the set time.