User Manual
Table Of Contents
- Basic User's Guide MFC-J460DW/MFC-J480DW/MFC-J485DW
- Brother Numbers
- Ordering Accessories and Supplies
- Notice - Disclaimer of Warranties (USA and Canada)
- You Can Use the Following Features
- User's Guides and Where to Find Them
- Basic Operations and Where to Find Instructions
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Please take a look at our FAQs, solutions, and videos online.
- Definitions of Notes
- For the Latest Driver Updates
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Routine Maintenance
- B Troubleshooting
- C Appendix
- D Index
Load Paper
Load paper in the paper tray
• If the [Check Paper] setting is set to
[On] and you pull the paper tray out of
the machine, a message appears on the
LCD asking if you want to change the
paper type and paper size. Change the
Paper Size and Paper Type settings if
needed, following the on-screen
instructions.
• Load only one size and type of paper in
the paper tray at a time.
• When you load a different paper size in
the tray, you must change the Paper
Size setting in the machine or the paper
size setting on your computer.
1
Pull the paper tray completely out of the
machine.
2
Open the output paper tray cover (1).
1
3
Gently press and slide the paper width
guides (1) and then the paper length
guide (2) to fit the paper size.
1
2
When you are using Legal size paper,
press the square paper tray expansion
button (1) and slide out the paper tray
until the square paper tray expansion
button locks into the square LGL hole.
1
2
Paper Handling
2
Paper Handling
7