User Manual

4
Fan the stack of paper well.
5
Gently load paper in the paper tray with
the printing surface face down.
Make sure the paper is flat in the tray
and the paper length guide (1) touches
the edges of the paper.
1
IMPORTANT
• Be careful not to push the paper in too far;
it may lift at the back of the tray and cause
paper feed problems.
• Loading more than 20 sheets of Photo 2L
(5" x 7")/(13 x 18 cm) paper may cause
paper jams.
To add paper before the tray is empty,
remove the paper from the tray and
combine it with the paper you are adding.
Always fan the stack of paper well to
prevent the machine from feeding multiple
pages.
6
Gently adjust the paper width guides (1)
to fit the paper.
Make sure the paper guides touch the
edges of the paper.
1
7
Close the output paper tray cover.
Slowly push the paper tray completely
into the machine.
8
While holding the paper tray in the
machine, pull out the paper support (1)
until it locks into place, and then unfold
the paper support flap (2).
2
1
8