User Manual
Table Of Contents
- Basic User's Guide MFC-J460DW/MFC-J480DW/MFC-J485DW
- Brother Numbers
- Ordering Accessories and Supplies
- Notice - Disclaimer of Warranties (USA and Canada)
- You Can Use the Following Features
- User's Guides and Where to Find Them
- Basic Operations and Where to Find Instructions
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Please take a look at our FAQs, solutions, and videos online.
- Definitions of Notes
- For the Latest Driver Updates
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Routine Maintenance
- B Troubleshooting
- C Appendix
- D Index
Error Code Problem and Recommended Solutions
TS-06 The wireless security information (Authentication method/Encryption method/
Network Key) is incorrect.
Confirm the wireless security information (Authentication method/Encryption
method/Network Key) listed in TS-04. If your router uses WEP encryption,
enter the key used as the first WEP key. Your Brother machine supports the
use of the first WEP key only.
TS-07 The machine cannot detect a wireless access point/router that has WPS or
AOSS
™
enabled.
If you would like to configure your wireless settings using WPS or AOSS
™
,
you must operate both your machine and the wireless access point/router.
Confirm that your wireless access point/router supports WPS or AOSS
™
and
try starting again.
If you do not know how to operate your wireless access point/router using
WPS or AOSS
™
, see the documentation provided with your wireless access
point/router, ask the manufacturer of your wireless access point/router, or ask
your network administrator.
TS-08
Two or more wireless access points that have WPS or AOSS
™
enabled are
detected.
• Confirm that only one wireless access point/router within range has the
WPS or AOSS
™
method active and try again.
• Try starting again after a few minutes to avoid interference from other
access points.
42