User Manual
Table Of Contents
- Basic User's Guide MFC-J460DW/MFC-J480DW/MFC-J485DW
- Brother Numbers
- Ordering Accessories and Supplies
- Notice - Disclaimer of Warranties (USA and Canada)
- You Can Use the Following Features
- User's Guides and Where to Find Them
- Basic Operations and Where to Find Instructions
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Please take a look at our FAQs, solutions, and videos online.
- Definitions of Notes
- For the Latest Driver Updates
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Routine Maintenance
- B Troubleshooting
- C Appendix
- D Index
Try printing with your machine. If the problem still remains, uninstall and reinstall the
printer driver.
5
If the problem still remains after trying all the above, try the following:
For a USB interface connection
• Change the USB cable for a new one.
• Use a different USB port.
For a Wireless Network connection
• Confirm your machine's Wireless status on the LCD.
The wireless connection setting is disabled. Enable the WLAN connection and
set up the wireless network connection.
The wireless access point cannot be detected. Set up the wireless network
connection again.
The wireless network is connected. A three-level indicator in the LCD displays
the current wireless signal strength.
You can configure wireless settings by pressing on the control panel.
If you cannot print on both sides of paper, check the following:
6
Change the paper size setting in the printer driver to Letter.
B
Troubleshooting
47