User guide
Table Of Contents
- Network User’s Guide
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Network Operation
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- 4 Control panel setup
- Network settings
- Restoring the network settings to factory default
- Printing the Network Configuration Report
- Printing the WLAN Report
- Function table and default factory settings
- 5 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Secure Function Lock 2.0
- Synchronize with SNTP server
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (For MFC-J2510/J4510DW/J4710DW) (Available as a download)
- 6 LDAP operation (For MFC-J2510/J4510DW/J4710DW)
- 7 Internet fax (For MFC models) (Available as a download)
- 8 Security features
- 9 Troubleshooting
- Network Glossary
- 10 Types of network connections and protocols
- 11 Configuring your machine for a network
- 12 Wireless network terms and concepts
- 13 Additional network settings from Windows®
- Types of additional network settings
- Installing drivers used for printing and scanning via Web Services (Windows Vista® and Windows® 7)
- Uninstalling drivers used for printing and scanning via Web Services (Windows Vista® and Windows® 7)
- Network printing and scanning installation for Infrastructure mode when using Vertical Pairing (Windows® 7)
- Appendixes
- Index
- brother ENG
LDAP operation (For MFC-J2510/J4510DW/J4710DW)
58
6
If there is no match on the server and the local address book, the LCD will show
Results cannot be found..
g Press a or b to scroll until you find the name you are looking for.
Press the name.
NOTE
To confirm details of the result information, press the name you are looking for, and then press Detail.
h If the result includes more than one fax number or E-mail address, press the location where you want to
send a fax.
i Press Apply.
j Press Fax Start.
NOTE
• The LDAP function of this machine supports LDAPv3.
• SSL/TLS is not supported.
• For more information, visit us at http://solutions.brother.com/
.