User Manual
Table Of Contents
- Software User’s Guide
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Maintenance tab
- Support
- Using FaceFilter Studio for photo printing by REALLUSION
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver
- Scanning a document using the WIA driver (Windows® Photo Gallery and Windows® Fax and Scan users)
- Using Nuance™ PaperPort™ 12SE
- Using BookScan Enhancer and Whiteboard Enhancer by REALLUSION
- 3 ControlCenter4
- 4 Remote Setup (For MFC models)
- 5 Brother PC-FAX Software (For MFC models)
- 6 PhotoCapture Center™
- 7 Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan button
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan button on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Index
- brother UK
Network Scanning
218
13
Scan to FTP 13
When you choose Scan to FTP, you can scan a monochrome or colour document directly to an FTP server
on your local network, or on the internet.
The details required to use Scan to FTP can be entered by using Web Based Management to pre-configure
and store the details in an FTP Profile.
NOTE
• Scan to FTP is available when FTP profiles are configured by using Web Based Management.
• We recommend Microsoft
®
Internet Explorer
®
8.0/9.0 for Windows
®
and Safari 5.0 for Macintosh. Please
also make sure that JavaScript and Cookies are always enabled in whichever browser you use. If a
different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
To use Web Based Management, type http://xxx .xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser and then you can configure or change the settings in
Scan to FTP/Network in the Scan tab. You can configure up to five FTP server profiles and you can choose
what profile numbers (1 to 5) to use for Scan to FTP settings in Scan to FTP/Network Profile.
NOTE
Refer to the guide noted below for information about how to find the IP address of your machine.
See Network User’s Guide: Printing the Network Configuration Report.
In addition to the seven preset file names you can store two user defined file names that can be used for
creating an FTP Server Profile.
Choose Scan to FTP/Network in Web Based Management. In Create a User Defined File Name, enter a
file name in one of the two user defined fields and click Submit. A maximum of 15 characters can be entered
in each of the user defined name fields.