User Manual
Table Of Contents
- Software User’s Guide
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Maintenance tab
- Support
- Using FaceFilter Studio for photo printing by REALLUSION
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver
- Scanning a document using the WIA driver (Windows® Photo Gallery and Windows® Fax and Scan users)
- Using Nuance™ PaperPort™ 12SE
- Using BookScan Enhancer and Whiteboard Enhancer by REALLUSION
- 3 ControlCenter4
- 4 Remote Setup (For MFC models)
- 5 Brother PC-FAX Software (For MFC models)
- 6 PhotoCapture Center™
- 7 Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan button
- 12 USB cable scanning
- 13 Network Scanning
- Before using Network Scanning
- Using the Scan button on your network
- Using Web Services for scanning on your network (Windows Vista® SP2 or later and Windows® 7)
- Index
- brother UK
ControlCenter4
83
3
a Select the Scan tab.
b Click (E-mail). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
d Click Scan. Your default E-mail application will open and the image will be attached to a new E-mail.
NOTE
The E-mail feature does not support Webmail services.
Saving the scanned image 3
The (File) button lets you scan an image to a folder on your hard disk in one of the file types shown in
the file attachment list.
a Select the Scan tab.
b Click (File). The Scan Settings dialog box appears.
c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned
image, check PreScan box.
d Click Scan. The image will be saved in the folder you have chosen.
How to change the default settings of each button 3
You can change the default settings of the (Image), (OCR), (E-mail) and (File) buttons.
a Right-click the button that you want to configure and click Button settings. The settings dialog box will
appear.
b Choose the settings for File Type, PreScan, Resolution, Scan Type, Document Size, Brightness,
Contrast, Continuous Scanning, 2-sided Scanning
1
and Auto Crop as needed.
1
(For MFC-J4710DW)
c Click OK. The new settings will be used as the default settings.
NOTE
• To preview and configure the scanned image, check PreScan box in the settings dialog box.
• You cannot use Auto Crop for Scan to OCR.