User Manual

Troubleshooting
111
B
Ink Absorber Full The ink absorber box or flushing box
is full. These components are
periodic maintenance items that may
require replacement after a period of
time to ensure optimum performance
from your Brother machine. Because
these components are periodic
maintenance items, the replacement
is not covered under the warranty.
The need to replace these items and
the time period before replacement is
dependent on the number of purges
and flushes required to clean the ink
system. These boxes acquire
amounts of ink during the different
purging and flushing operations. The
number of times a machine purges
and flushes for cleaning varies
depending on different situations. For
example, frequently powering the
machine on and off will cause
numerous cleaning cycles since the
machine automatically cleans upon
power up. The use of non-Brother ink
may cause frequent cleanings
because non-Brother ink could cause
poor print quality which is resolved by
cleaning. The more cleaning the
machine requires, the faster these
boxes will fill up.
NOTE
Repairs resulting from the use of
non-Brother supplies may not be
covered under the stated product
warranty.
The ink absorber box or flushing box
will need to be replaced. Contact
Brother Customer Service or your
local Brother Authorised Service
Centre to have your machine
serviced.
Other reasons for cleaning are:
1 After a paper jam has been
cleared, the machine
automatically cleans itself before
the next received fax is printed.
2 The machine automatically cleans
itself after sitting idle for more than
30 days (infrequent use).
3 The machine automatically cleans
itself after ink cartridges of the
same colour have been replaced
12 times.
Ink Absorber NearFull The ink absorber box or flushing box
is nearly full.
Call Brother customer service or your
local Brother dealer.
Ink Low One or more of the ink cartridges are
near the end of their life. If one of the
colour ink cartridges is near the end
of its life and someone is sending you
a colour fax, your machine’s
“handshake” will ask that the fax be
sent as monochrome. If the sending
machine has the ability to convert it,
the colour fax will be printed at your
machine as a monochrome fax.
Order a new ink cartridge. You can
continue printing until the
Touchscreen shows
Cannot Print. (See Replacing the
ink cartridges on page 99.)
Low Temperature The print head is too cold. Allow the machine to warm up.
Error Message Cause Action