User Manual
Table Of Contents
- Basic User’s Guide MFC-J2510 MFC-J4510DW MFC-J4710DW
- User's Guides and where do I find them?
- Table of Contents
- 1 General information
- 2 Loading paper
- Loading paper and other print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
- brother ARL/ASA/NZ
116
(MFC-J4510DW)
Wrong Paper
(MFC-J4710DW)
Wrong Paper
Wrong Paper #1
Wrong Paper #2
The paper size setting does not
match the size of paper in the tray.
1 Check that the paper size you
choose matches the size of paper
in the tray.
(MFC-J2510/MFC-J4510DW:
See Paper Size on page 40.)
(MFC-J4710DW: See Paper Size
and Type (MFC-J4710DW)
on page 41.)
2 Make sure you loaded the paper
in the correct orientation, by
setting the paper guides at the
indicators for your paper size.
(See Loading paper and other
print media on page 21.)
3 After you have checked the paper
size and the paper orientation,
press OK on the Touchscreen.
The paper orientation is not correct
for the paper size.
You did not set the paper guides in
the tray to the indicators for the paper
size you are using.
Wrong Tray Setting
(MFC-J4710DW)
The machine’s Paper Size and Tray
Use settings do not match the size of
paper in the tray you are using.
Configure the paper size setting for
the tray according to the on-screen
instructions.
Error Message Cause Action