User Manual
Table Of Contents
- Basic User’s Guide MFC-J2510 MFC-J4510DW MFC-J4710DW
- User's Guides and where do I find them?
- Table of Contents
- 1 General information
- 2 Loading paper
- Loading paper and other print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
- brother ARL/ASA/NZ
Settings and features tables
169
C
Options C
(for to E-mail Server)
NOTE
It is available after IFAX is downloaded.
Level1 Level2 Options1 Descriptions Page
Options 2-sided Scan
(MFC-J4710DW)
Off*
2-sided Scan:
Long Edge
2-sided Scan:
Short Edge
You can choose the 2-sided
scan mode.
See .
Scan Type Colour*
Black and White
You can choose the scan type
for your document.
Resolution 100 dpi
200 dpi*
300 dpi
600 dpi
Auto
You can choose the scan
resolution for your document.
File Type (If you choose the
Colour option in the
Scan Type setting)
PDF*
JPEG
(If you choose the
Mono option in the
Scan Type setting)
PDF*
TIFF
You can choose the file format
for your document.
Set New Default Yes
No
You can save your scan
settings as the default settings.
Factory Reset Yes
No
You can restore all settings to
the original factory default
settings.
See Software User’s Guide.
The default settings are shown in Bold with an asterisk.