User Manual
Table Of Contents
- Basic User’s Guide MFC-J2510 MFC-J4510DW MFC-J4710DW
- User's Guides and where do I find them?
- Table of Contents
- 1 General information
- 2 Loading paper
- Loading paper and other print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
- brother ARL/ASA/NZ
Chapter 2
40
Paper settings 2
Paper Size and Type
(MFC-J2510/MFC-J4510DW) 2
Paper Type 2
To get the best print quality, set the machine
for the type of paper you are using.
a Press .
b Press .
c Swipe up or down, or press a or b to
display Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency,
and then press the option you want to
set.
d Press .
NOTE
The machine ejects paper with the printed
surfaces face up onto the paper tray at the
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Paper Size 2
You can use the following sizes of paper for
printing copies: A4, A5, A3, 10 15 cm,
Letter, Legal and Ledger and two sizes for
printing faxes: A4 or Letter. When you
change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a Press .
b Press .
c Press A4, A5, 10x15cm or Letter.
d Press .
NOTE
When you copy using A3, Legal or
Ledger size paper, set the paper size
option in Copy mode.