User Manual

Sending a fax
51
4
c You can change the following
fax-sending settings. Press Options.
Swipe up or down, or press a or b to
scroll through the fax settings. When the
setting you want is displayed, press it
and choose your new option. When you
have finished changing options, press
OK.
(Basic User’s Guide)
For details about changing the following
fax-sending settings, see pages 52 to
54.
 Glass Scan Size
 Colour Fax Transmission
 Preview Outgoing Fax
 Transmission Verification Report
(Setup)
(Advanced User’s Guide)
For more advanced fax-sending
operations and settings
(See Advanced User’s Guide: Sending
a fax.)
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 2-sided Fax (MFC-J4710DW)
 Faxing at the end of a call
 Broadcasting
 Real Time Transmission
 Overseas Mode
 Delayed Fax
 Batch Transmission
 Cancelling Waiting Jobs
 Polled Transmit
d Enter the fax number.
Using the dial pad
Using the Address Book
 Address Book
Using the call history
 Outgoing Call
 Caller ID history
NOTE
• You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
on page 53.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See Network User’s Guide: LDAP
operation.)
e Press Fax Start.
Faxing from the ADF 4
 The machine starts scanning the
document to be sent.
Faxing from the scanner glass 4
 If you choose Mono in the
Colour Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you choose Colour in the
Colour Setting, the
Touchscreen asks if you want to
send a colour fax. Press
Yes (Colour fax) to confirm.
The machine starts dialling and
sending the document.