User Manual
Table Of Contents
- Basic User’s Guide MFC-J2510 MFC-J4510DW MFC-J4710DW
- User's Guides and where do I find them?
- Table of Contents
- 1 General information
- 2 Loading paper
- Loading paper and other print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
- brother ARL/ASA/NZ
55
5
5
Receive Modes 5
You must choose a Receive Mode depending on the external devices and telephone services you
have on your line.
Choose the Receive Mode 5
By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct receive mode.
For more detailed information on the Receive Modes, see Using Receive Modes on page 57.
To set the Receive Mode follow the instructions below:
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display Initial Setup.
d Press Initial Setup.
e Swipe up or down, or press a or b to display Receive Mode.
Receiving a fax 5
Do you want to use the telephone features of your machine (if available), an external
telephone or external telephone answering device connected on the same line as the
machine?
Yes
Fax Only
No
No
No
Manual
Yes
External TAD
Fax/Tel
Are you using the voice message function of
an external telephone answering device?
Do you want the machine to answer fax and
telephone calls automatically?
Yes