User Manual

NOTE
NOTE species the operating environment, conditions for installation,
or special conditions of use.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injuries.
1
Load plain A4 paper
Pull the paper tray completely
out of the machine.
Open the output paper tray
cover a.
Connect the telephone line cord.
Use the socket marked LINE.
Fan the paper well and load it in the tray,
and then adjust the paper guides.
Connect the power cord. The machine
will power on automatically.
NOTE
If your machine is sharing one telephone line with an
external telephone, connect it as shown below.
a. Extension telephone
b. External telephone
Quick Setup Guide
MFC-J480DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
3
Connect the telephone line cord
If you are not using your machine as a fax, go to
4
.
Close the output paper tray cover, and
then slowly push the tray completely
into the machine.
NOTE
Pull out the paper support a, and unfold
the paper support ap b so that the
printed pages do not fall.
Follow the on-screen instructions to
install the ink cartridges.
The machine will prepare the ink
tube system for printing.
When the machine has finished the initial cleaning process, follow the
on-screen instructions to configure the machine settings.
• Check print quality
• Set date and time
• Set Firmware Update Notice
• Print the installation sheet
Open the ink cartridge cover, and
then remove the orange protective
part from the machine.
6
Install introductory ink cartridges
7
Machine settings
2
Connect the power cord
NOTE
You can adjust the control panel angle
to read the LCD more easily.
LEX030040-00
OCE/ASA/GLF
Version 0
Unpack the machine and check the components
1. Remove the protective tape and film covering the machine and the LCD.
2. Make sure you have all components.
• The components included in the box may differ depending on your country.
WARNING
Plastic bags are used in the packing of your machine. To
avoid the danger of suffocation, keep these plastic bags
away from babies and children. Plastic bags are not toys.
NOTE
• Save all packing materials and the box in case for any
reason you must ship your machine.
• Please use the supplied USB cable for a USB
connection.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that
is no more than 2 metres long.
(Australia
only)
(Hong Kong
only)
Introductory Ink Cartridges [x4]
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Basic User’s Guide
Product Safety Guide
Power Cord Telephone Line Cord
Adapter
CD-ROM Telephone Line Cord USB Interface Cable
5
Choose your language (Available only for
some countries)
4
Set your country (Available only for some
countries)
1. Press a or b to choose your country. Press OK.
2. Press a or b to choose [Yes] or [No]. Press OK.
3. After the LCD shows [Accepted] for a few seconds, the machine will restart automatically.
1. Press a or b to choose your language. Press OK.
2. Press a or b to choose [Yes] or [No]. Press OK.
8
Choose your language (Available only for some countries)
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Local Language]. Press OK.
c. Select your language. Press OK.
3. Press Stop/Exit.
1
(Example for Australia)
(Example for Australia)
1
2
(Example for
Australia)
1
2
Watch our FAQ Videos for help
with setting up your Brother
machine.
solutions.brother.com/videos
Visit the Brother support website
http://support.brother.com