User Manual

NOTE
NOTE species the operating environment, conditions for installation, or
special conditions of use.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injuries.
Unpack the machine and check the components
1. Remove the protective tape and film covering the machine, and also from the
Touchscreen.
2. Make sure you have all components.
The components included in the box may differ depending on your country.
WARNING
Plastic bags are used in the packing of your machine. To avoid the danger of
suffocation, keep these plastic bags away from babies and children. Plastic bags
are not toys.
NOTE
Most of the illustrations in this Quick Setup Guide show the MFC-J5720DW.
• Save all packing materials and the box in case for any reason you must ship your
machine.
• You must purchase the correct interface cable for the interface you want to use
(for USB or network connection).
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres
long.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
1
Load plain A4 paper
Pull the paper tray completely
out of the machine.
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine. Close the scanner cover.
Follow the Touchscreen instructions
to install the ink cartridges.
The machine will prepare the ink
tube system for printing.
When the machine has finished the initial cleaning process,
follow the Touchscreen instructions to configure the machine
settings.
• Check print quality
• Set date and time
• Set tray settings
• View operation tips
• Print the installation sheet
Open the ink cartridge cover a.
Fan the paper well and load it in the tray.
Pull out the paper support a, and
unfold the paper support flap b.
Connect the power cord.
Lift the scanner cover.
Adjust the paper guides.
Do not exceed this
mark (aaa).
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below.
NOTE
You can adjust the angle of the control
panel by lifting it.
a. Extension telephone
b. External telephone
Quick Setup Guide
MFC-J5620DW / MFC-J5720DW
CEE-ENG
Version 0
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Introductory Ink Cartridges [x4]
Black
Yellow
Cyan
Magenta
(Approx. 65% yield of the
replacement cartridge (High Yield)
uu
Online User’s Guide)
2
Connect power cord and telephone line cord
If you are not using your machine as a fax, connect the power cord and go to
3
.
3
Install introductory ink cartridges
4
Machine Settings
Quick Setup Guide
Product Safety Guide
CD-ROM
Maintenance Sheet Power Cord
Telephone Line Cord
Watch our FAQ Videos for help
with setting up your Brother
machine.
solutions.brother.com/videos
Visit the Brother support website
http://support.brother.com
5
Choose your language
1. Press .
2. Press All Settings.
3. Swipe up or down, or press a or b to display Initial Setup.
Press Initial Setup.
4. Swipe up or down, or press a or b to display Local Language.
Press Local Language.
5. Press your language.
6. Press .
1
2
1
2
1