User Manual
Table Of Contents
- Quick Setup Guide MFC-J5910DW
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain A4 paper
- 3 Connect the power cord and telephone line
- 4 Set your country (Australia and New Zealand only)
- 5 Install the ink cartridges
- 6 Check the print quality
- 7 Choose your language (if needed) (Not available in Australia and New Zealand)
- 8 Choose a Receive Mode
- 9 Set the LCD contrast (if needed)
- 10 Set the date and time
- 11 Enter personal information (Station ID)
- 12 Fax Transmission Report
- 13 Set Tone or Pulse dialling mode (Not available in New Zealand)
- 14 Set the telephone line compatibility (VoIP)
- 15 Choose your connection type
- For USB interface users (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7)
- For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wired network interface users (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7)
- For wired network interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wireless network interface users
- 16 Before you begin
- 17 Choose your wireless install method
- 18 Configuration using the CD-ROM installer and a USB cable (Windows® only)
- 18 Manual configuration from the control panel (Windows® and Macintosh)
- 18 One-push configuration using WPS or AOSS™ (Windows® and Macintosh)
- Troubleshooting
- Install the drivers & software (Windows® XP Home/XP Professional/Windows Vista®/Windows® 7)
- Install the drivers & software (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brother ARL/ASA/NZ
- Start Here
9
10
Set the date and time
The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
a Press Menu.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press Date&Time.
d Enter the last two digits of the year on the
Touchscreen, and then press OK.
To move the cursor to the left, press and
re-enter the number.
e Repeat for month/day/time in 24-hour format.
f Press Stop/Exit.
11
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
Information on how to enter text uuBasic User’s
Guide: Entering Text
a Press Menu.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press s or t to display Station ID.
Press Station ID.
d Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
e Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
f Press Stop/Exit.
(e.g. Enter 1 2 for 2012.)
Note
• Press to cycle between letters, numbers
and special characters. (The characters
available may differ depending on your
country.)
• If you need to enter a character that is on the
same button as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press to delete it and re-enter
the correct character.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.